|Outlet Temperature||maximum 100 Degree|
|Primary Exchanger Material||Steel,Titanium|
CORROTECH Flux Heating System minimizes the transfer of iron from the flux bath to the molten zinc. This greatly reduces zinc consumption, since 1 part of iron, which dissolves into the zinc bath reacts with 25 parts of zinc, to form Dross. The process in the flux system has the added advantage of damping the reaction between iron and zinc which ensures low iron transfer from the work piece to the molten zinc.
CORROTECH recycling and regenerating fluxing plant is designed to keep the iron content in the fluxing solution under close control and at the same time the value of the pH of the solution. The iron concentration is maintained at a continuous level of less than 5g per liter of flux solution.
The fluxing solution is kept in a closed circuit recycling unit where adding hydrogen peroxide and ammonia, the iron is separated as sludge. The fluxing tank solution is cleared through a sequence of oxidizing tank, neutralizing tank, sludge settling tank and filter press after which the clear flux is sent back to the fluxing tank.
Advantages of CORROTECH Flux Regeneration System: