Arvind Corrotech Limited

• Fully automatic design with auto ignition, flame safeguard controls
• Control panel equipped with PLC, HMI & SCADA systems
• Thermal protection by insulating the furnace with ceramic fiber & modules
• Simple design & easy to maintain

• Variants include dual fuel (oil & gas), oil (LDO/furnace oil), gas (PNG/LPG), electrically operated.
• Uniform furnace temperature; burners fired at their highest exit velocity.
• Burner firing cycle is monitored by the process controller within the PLC.
• Automatic temperature controls for flue gases and molten zinc.
• Motorised valve for precise combustion air control.
• Retractable high Ni/Cr props for kettle supports. Kettle installed with heat shields & dross protection.
• Base refractory to maximize fuel efficiency.

• Fuel savings; efficient firing setting, maximum heat transfer with minimal fuel input.
• Higher product quality and production rates.
• Low ash and dross formation.
• Long kettle life.
• Low in maintenance.
• Lower NOx; burners operate at high fire with low excess air.

• Dual Fual (Oil & Gas), Oil Heated & Gas Heated (PNG & LPG).
• Fully Automatic Design With Auto Ignition.
• Flame Safeguard controls.
• Control Pannel Equipped With PLC, HMI & SCADASystem.
• Automatic Temp. Controls For Fule Gases & Molten Zinc.
• Precise Combustion Air Control.
• Simple Design & Easy to Maintain. 

Additional Information:

• Production Capacity: as per design

Galvanizing Furnace

Corrotech designs highly efficient and reliable pulse fired galvanizing furnace. The furnace casing is fabricated using high quality mild steel rolled sections. Control pipe trains are assembled and installed by qualified and skilled engineers to achieve the best performance and aesthetics. The casing is thickly insulated using international quality ceramic fibers and modules.

Equipment Design:

• Fully Automatic Galvanizing Furnace
• High Velocity Burners
• Furnace casing lined with Ceramic Fibre for Insulation
• Pulse Firing Operations
• Suited for fuel such as Gas, Diesel, Furnace Oil or Gas or Dual Fuel, Electrically Operated
• Auto Ignition System
• Burner Auto Temperature Control Systems
• Base Refractory
• PLC based Burner Management System
• Zinc Metal Temperature and Level Controls
• Flue Gas Temperature Controls
• High Nickel Chromium Tubes for Kettle Supports

Benefits and Cost Savings:

• Fuel Savings; efficient firing setting, maximum heat transfer with minimal fuel input
• Temperature Uniformity; convective heat transfer to the load and mixing of atmosphere, firing the burners at their highest exit velocity
• Lower Emissions; burners operate at high fire with low excess air
• Maximized Productivity; maximum energy transfer to the furnace load in the least amount of time
• Low Ash and Dross Formation
• Long Kettle Life
• Low in maintenance
• Improved turn-down

Additional Information:

• Item Code: 10-1
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Mundra
• Production Capacity: 500 - 5000 Tons/Month
• Delivery Time: 4 months
• Packaging Details: Superior Packing as per requirement

• Variants include dual fuel (oil & gas), oil (LDO/furnace oil), gas (PNG/LPG), electrically operated.
• Uniform furnace temperature; burners fired at their highest exit velocity.
• Burner firing cycle is monitored by the process controller within the PLC.
• Automatic temperature controls for flue gases and molten zinc.
• Motorised valve for precise combustion air control.
• Retractable high Ni/Cr props for kettle supports. Kettle installed with heat shields & dross protection.
• Base refractory to maximize fuel efficiency.

Additional Information:

• Production Capacity: 500 - 5000 Tons/Month
• Delivery Time: 1 Month

• Fully automatic galvanizing plant equipment.
• Pulse fired, high velocity, dual fuel furnaces.
• Re-circulating hot air dryer, waste heat recovery systems.
• Polypropylene tanks for degreasing, pickling, rinsing & fluxing.
• Flux regeneration & filtration plant, flux heating system.
• Fume extraction systems for acid & zinc, fume enclosures.
• Quench & passivation tanks.
• Work jigs, drosser, kettle cover, skimmer, ash buckets.
• Jigging & unjigging stations.
• Plant layout, design & project consultancy